Lighting & Dimming Control Systems
Dimming Control Systems
In addition to our standard ex-stock range of 2, 4, 12 & 24 channel cabinets, we will custom build cabinets to meet your particular requirements with single & three phase power supplies and I/P & O/P protection devices to comply with the local regulations. All our cabinets are designed to use the same interchangeable dimming and switching modules. All our dimming systems as manufactured in the UK and comply with all the applicable EC specification EN5501 on EMC and Low Voltage directives.
The metal construction cabinets have been designed and built for: Safety, Reliability & Serviceability. Finished in RAL 7032 Grey, epoxy polyester semi-gloss, with segregated compartments for power and control termination’s. They are fitted with an I/P isolator and/or RCCD’s as required and an output MCB per channel.
The MCB DIN rail is of sufficient length to allow for a 2nd I/P device & up to 25% more MCB’s than dimmer channels, to be easily and quickly fitted on site, for emergency sensing, dimmer sub-ccts or clean feed distribution etc. MCB spaces.
Ventilation is by natural convection. NO electronic item, including the choke or thyristors, are fitted directly to the cabinet to use it as a heat sink.
Lighting Control Systems
LCS2000: Lighting Control System Core Switching - Typical Block Schematic
|
